HomeStore

SLP® Head Gasket Set Volvo Penta KAD44 KAMD44 KAD300 KAMD300 3583788 3583786

Product image 1
1 / 2

SLP® Head Gasket Set Volvo Penta KAD44 KAMD44 KAD300 KAMD300 3583788 3583786

High-quality marine engine spare parts from Sweden.

SLP® premium-quality decarbonizing gasket set for Volvo Penta:

  • KAD44P-A KAD44P-B KAD44P-C KAMD44P-A KAMD44P-C
  • KAD300-A KAMD300-A

This head gasket kit, also known as a decarbonizing gasket kit, includes the head gasket with reference  3583786, 3582433, 3580742, 858992, 876853. The cylinder head bolts with reference 838775 should be replaced when needed[1], and tightening should be performed in five stages, following the attached diagram. 

Tightening torque settings:

  • 30 Nm
  • 60 Nm
  • 100 Nm
  • Angle-tighten the screws 90° in numerical order as follows: Mark up the position of the screw heads with a chalk mark on the screw and cylinder head. Do not use a punch or a scribe as they can confuse future operations. Mark a 14mm socket, locate the socket as illustrated on the second picture, with the socket marking 90°counter-clockwise from the chalk mark on the cylinder head. Carry out angle tightening by tightening until the socket mark and the cylinder head chalk-mark are opposite each other.
  • Angle-tighten the screws 90° in numerical order as above. Tightening is finished when all screws have been angle tightened to 90°. Retightening after use is not necessary.

Kindly check the second picture that provides the necessary instructions, directly quoted from the Volvo Penta workshop manual.

[1] The cylinder head bolts should be replaced when there are signs of elongation, or cannot be specified if it is already elongated, by checking the "waist" of the bolt. 

SLP® Head Gasket Set Volvo Penta KAD44 KAMD44 KAD300 KAMD300 3583788 3583786

This product replaces the following manufacturer's part nr:

  • SLP order number: HS-788
  • Volvo Penta: 3583788, 3582437
  • Orbitrade: ORB21105, 21105
  • Recmar: REC3583788
  • Crom order number: 121137

The references that are listed here are trademarks that apply to the respective trademark owners. The references are used only for a reference purpose. Our product is compatible with these reference numbers. Please note that our product is an aftermarket product (non-OEM), unless otherwise stated.

ESTIMATED DELIVERY TIME

High-quality marine engine spare parts from Sweden.

SLP® premium-quality decarbonizing gasket set for Volvo Penta:

  • KAD44P-A KAD44P-B KAD44P-C KAMD44P-A KAMD44P-C
  • KAD300-A KAMD300-A

This head gasket kit, also known as a decarbonizing gasket kit, includes the head gasket with reference  3583786, 3582433, 3580742, 858992, 876853. The cylinder head bolts with reference 838775 should be replaced when needed[1], and tightening should be performed in five stages, following the attached diagram. 

Tightening torque settings:

  • 30 Nm
  • 60 Nm
  • 100 Nm
  • Angle-tighten the screws 90° in numerical order as follows: Mark up the position of the screw heads with a chalk mark on the screw and cylinder head. Do not use a punch or a scribe as they can confuse future operations. Mark a 14mm socket, locate the socket as illustrated on the second picture, with the socket marking 90°counter-clockwise from the chalk mark on the cylinder head. Carry out angle tightening by tightening until the socket mark and the cylinder head chalk-mark are opposite each other.
  • Angle-tighten the screws 90° in numerical order as above. Tightening is finished when all screws have been angle tightened to 90°. Retightening after use is not necessary.

Kindly check the second picture that provides the necessary instructions, directly quoted from the Volvo Penta workshop manual.

[1] The cylinder head bolts should be replaced when there are signs of elongation, or cannot be specified if it is already elongated, by checking the "waist" of the bolt. 

SLP® Head Gasket Set Volvo Penta KAD44 KAMD44 KAD300 KAMD300 3583788 3583786

This product replaces the following manufacturer's part nr:

  • SLP order number: HS-788
  • Volvo Penta: 3583788, 3582437
  • Orbitrade: ORB21105, 21105
  • Recmar: REC3583788
  • Crom order number: 121137

The references that are listed here are trademarks that apply to the respective trademark owners. The references are used only for a reference purpose. Our product is compatible with these reference numbers. Please note that our product is an aftermarket product (non-OEM), unless otherwise stated.

ESTIMATED DELIVERY TIME

$102.98

Original: $294.22

-65%
SLP® Head Gasket Set Volvo Penta KAD44 KAMD44 KAD300 KAMD300 3583788 3583786

$294.22

$102.98

Description

High-quality marine engine spare parts from Sweden.

SLP® premium-quality decarbonizing gasket set for Volvo Penta:

  • KAD44P-A KAD44P-B KAD44P-C KAMD44P-A KAMD44P-C
  • KAD300-A KAMD300-A

This head gasket kit, also known as a decarbonizing gasket kit, includes the head gasket with reference  3583786, 3582433, 3580742, 858992, 876853. The cylinder head bolts with reference 838775 should be replaced when needed[1], and tightening should be performed in five stages, following the attached diagram. 

Tightening torque settings:

  • 30 Nm
  • 60 Nm
  • 100 Nm
  • Angle-tighten the screws 90° in numerical order as follows: Mark up the position of the screw heads with a chalk mark on the screw and cylinder head. Do not use a punch or a scribe as they can confuse future operations. Mark a 14mm socket, locate the socket as illustrated on the second picture, with the socket marking 90°counter-clockwise from the chalk mark on the cylinder head. Carry out angle tightening by tightening until the socket mark and the cylinder head chalk-mark are opposite each other.
  • Angle-tighten the screws 90° in numerical order as above. Tightening is finished when all screws have been angle tightened to 90°. Retightening after use is not necessary.

Kindly check the second picture that provides the necessary instructions, directly quoted from the Volvo Penta workshop manual.

[1] The cylinder head bolts should be replaced when there are signs of elongation, or cannot be specified if it is already elongated, by checking the "waist" of the bolt. 

SLP® Head Gasket Set Volvo Penta KAD44 KAMD44 KAD300 KAMD300 3583788 3583786

This product replaces the following manufacturer's part nr:

  • SLP order number: HS-788
  • Volvo Penta: 3583788, 3582437
  • Orbitrade: ORB21105, 21105
  • Recmar: REC3583788
  • Crom order number: 121137

The references that are listed here are trademarks that apply to the respective trademark owners. The references are used only for a reference purpose. Our product is compatible with these reference numbers. Please note that our product is an aftermarket product (non-OEM), unless otherwise stated.

ESTIMATED DELIVERY TIME

You may also like

Thumbnail 1

SLP® Oil pan gasket Set Volvo Penta D4 D6 3588434

$453.16

-65%
Thumbnail 1

SLP® Cylinder Head gasket set Volvo Penta AQD70B TAMD70 275525

$82.30

$28.80

-65%
Thumbnail 1Thumbnail 2

SLP ® Overhaul kit for Volvo TAD741GE replaces 877667

$3,520.23

$1,232.08

Thumbnail 1

SLP ® head repair kit for Volvo A30C TD104KAE replaces 11705368

$1,165.44

-65%
Thumbnail 1

* SLP ® head repair kit for Volvo A30C L150 L150C TD103KBE TD103KCE replaces 11701970

$812.24

$284.28

-65%
Thumbnail 1

SLP ® head repair kit for Volvo A35C A40 EC450 EC650 replaces 11990749

$694.51

$243.08

-65%
Thumbnail 1

SLP ® head repair kit for Volvo L330C L330C LL TD164KAE replaces 11999875

$1,518.64

$531.52

-65%
Thumbnail 1

SLP ® Overhaul kit for Volvo BL60 BL61 BL70 BL71 replaces 11712335

$2,342.78

$819.97

-65%
Thumbnail 1

SLP ® Overhaul kit for Volvo D4EEAE3 D4EEBE3 replaces 15143615

$1,754.11

$613.94

-65%
Thumbnail 1Thumbnail 2

SLP® trim cylinder ram for Volvo Penta SX transoms 3857471 3857470

$204.74

$71.66

Thumbnail 1

SLP® Circulation Pump Repair Kit Volvo GM612 GM614 LM218 LM225 11701725, 754100

$305.99

Thumbnail 1

SLP® Circulation Pump Repair Kit Volvo TD100A TD100G 276800

$329.54