Nauticus® KIT FLAPS MANUAL 30 LB. C/TAB 9.5 x 10'' (24 x 25,4 cm) SX9510-30
High-quality marine engine spare parts.
SX9510-30 – Self-Adjusting Trim Tabs
Self-adjusting trim tabs made from composite plastic, suitable for motorboats with a length between 13–15 ft (3.3–3.8 m).
Recommended engine power:
• 20–35 hp
The system uses a gas spring with a preset load value determined during installation. Together with its built-in control valve, it helps manage the boat’s trim and reduces the planing threshold by up to 33%. At lower speeds, the tabs increase stern lift, allowing the boat to reach planing position more quickly.
When the boat reaches planing speed, the tabs automatically shift into a horizontal rest position to minimize drag. During normal operation, they act as dampers, improving stability in turns and rough water.
• Simple installation – no electrical or hydraulic components required
• Helps reduce planing threshold for improved fuel efficiency and handling
• Increases comfort and stability during operation
• Model: Nauticus SX9510-30
• Trim plate size: 9.5 × 10 in (25.4 × 24 cm)
• Cylinder: 30 lb (13.6 kg)– Red / Part no. GS40059 (GA5001-30)
Nauticus® KIT FLAPS MANUAL 30 LB. C/TAB 9.5 x 10'' (24 x 25,4 cm) SX9510-30
This product replaces the following manufacturer's part nr
- Nauticus: SX9510-30
- Recmar order number: GS40053
The references that are listed here are trademarks that apply to the respective trademark owners. The references are used only for a reference purpose. Our product is compatible with these reference numbers. Please note that our product is an aftermarket product (non-OEM), unless otherwise stated.
ESTIMATED DELIVERY TIME
High-quality marine engine spare parts.
SX9510-30 – Self-Adjusting Trim Tabs
Self-adjusting trim tabs made from composite plastic, suitable for motorboats with a length between 13–15 ft (3.3–3.8 m).
Recommended engine power:
• 20–35 hp
The system uses a gas spring with a preset load value determined during installation. Together with its built-in control valve, it helps manage the boat’s trim and reduces the planing threshold by up to 33%. At lower speeds, the tabs increase stern lift, allowing the boat to reach planing position more quickly.
When the boat reaches planing speed, the tabs automatically shift into a horizontal rest position to minimize drag. During normal operation, they act as dampers, improving stability in turns and rough water.
• Simple installation – no electrical or hydraulic components required
• Helps reduce planing threshold for improved fuel efficiency and handling
• Increases comfort and stability during operation
• Model: Nauticus SX9510-30
• Trim plate size: 9.5 × 10 in (25.4 × 24 cm)
• Cylinder: 30 lb (13.6 kg)– Red / Part no. GS40059 (GA5001-30)
Nauticus® KIT FLAPS MANUAL 30 LB. C/TAB 9.5 x 10'' (24 x 25,4 cm) SX9510-30
This product replaces the following manufacturer's part nr
- Nauticus: SX9510-30
- Recmar order number: GS40053
The references that are listed here are trademarks that apply to the respective trademark owners. The references are used only for a reference purpose. Our product is compatible with these reference numbers. Please note that our product is an aftermarket product (non-OEM), unless otherwise stated.
ESTIMATED DELIVERY TIME
Original: $235.35
-65%$235.35
$82.37Description
High-quality marine engine spare parts.
SX9510-30 – Self-Adjusting Trim Tabs
Self-adjusting trim tabs made from composite plastic, suitable for motorboats with a length between 13–15 ft (3.3–3.8 m).
Recommended engine power:
• 20–35 hp
The system uses a gas spring with a preset load value determined during installation. Together with its built-in control valve, it helps manage the boat’s trim and reduces the planing threshold by up to 33%. At lower speeds, the tabs increase stern lift, allowing the boat to reach planing position more quickly.
When the boat reaches planing speed, the tabs automatically shift into a horizontal rest position to minimize drag. During normal operation, they act as dampers, improving stability in turns and rough water.
• Simple installation – no electrical or hydraulic components required
• Helps reduce planing threshold for improved fuel efficiency and handling
• Increases comfort and stability during operation
• Model: Nauticus SX9510-30
• Trim plate size: 9.5 × 10 in (25.4 × 24 cm)
• Cylinder: 30 lb (13.6 kg)– Red / Part no. GS40059 (GA5001-30)
Nauticus® KIT FLAPS MANUAL 30 LB. C/TAB 9.5 x 10'' (24 x 25,4 cm) SX9510-30
This product replaces the following manufacturer's part nr
- Nauticus: SX9510-30
- Recmar order number: GS40053
The references that are listed here are trademarks that apply to the respective trademark owners. The references are used only for a reference purpose. Our product is compatible with these reference numbers. Please note that our product is an aftermarket product (non-OEM), unless otherwise stated.
